90 Degree Elbow
90 Degree Long Elbow
90 Degree Short
Information
The shape and dimensions of the products and the materials used are based on the following standards
| Product Type | Applicable Standard | Material Standard | Symbol for different types according to material type |
|---|---|---|---|
| Elbow | JIS B 2309 | JIS G 3448 | SUS 304 WD |
| TEE | JIS G 3459 | ||
| Reducer | JIS G 4304 | ||
| Cap | JIS G 4305 | ||
| Lap Joint | JIS G 4303 |
About SUS-TPD
| [SUS304 TPD] | For water supply, hot water supply, drainage, cold / hot water, fire extinguishing water etc. piping |
|---|---|
| [SUS315 J1TPD] | Used when stronger resistance against water quality, environment, etc… (compared to SUS304 TPD) is required |
| [SUS315 J2TPD] | Used in piping system for hot water supply system, stress corrison cracking resistance is stronger than in SUS316 TPD |
| [SUS316 TPD] | Used when stronger resistance against water quality, environment, etc… (compared to SUS304 TPD) is required |
[General Dimension Tolerance]
| Fitting Type | Category | Su | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 30 | 40 | 50 | 60 | 75 | 80 | 100 | 125 | 150 | 200 | 250 | 300 | ||
| 45 Degree Elbow 90 Degree Elbow |
Distance from the center to the end face (H, F) |
±0.8 | ±1.2 | ||||||||||
| Reducer | Distance from end face to end face (H) |
±0.8 | ±1.2 | ||||||||||
| TEE | Distance from the center to the end face (C, M) |
±0.8 | ±1.2 | ||||||||||
| Lap Joint | Outer Diamter of Body | ±1.6 | ±2.4 | ±3.2 | ±4.0 | ||||||||
| Length (F) | ±0.8 | ±1.2 | |||||||||||
| Diameter of Collar (G) | 0，－0.8 | 0, – 1.6 | |||||||||||
| Thickness of Collar (GT) | + 1.6, 0 | ||||||||||||
| Cap | Distance from back to end face | ±3.2 | ±6.4 | ||||||||||
Size (mm)
:
2018/12/17
About
Business
Materials to download